41
ENGLISH
CONVENIENCE FUNCTIONS
------------------------------------------------------------------------
Changing the PIN code
You can also enter a personal PIN code instead
of the default code »1234«. Please take note of
your own PIN code.
1 Select
»Set PIN« with »
C
« or »
D
« and
press »OK« to confirm.
2
Enter the current PIN code 1234 with
»1...0«.
3
Enter your new four digit PIN code with
»1...0«.
4
Enter your new four digit PIN code with
»1...0« again.
5 Press »M« to end the setting.
Locking television channels
You can lock individual television channels, for
example channels unsuitable for children, using
a personal PIN code.
1 Open the menu with
»M«.
2 Select the
»SOURCE SETUP« menu with
»
C
« or »
D
« and press »OK« to confirm.
3 Select the line
»Program Table« with »
C
« or
»
D
« and press »OK« to confirm.
– The
»PROGRAM TABLE« menu is dis-
played.
4 In the
»PROGRAM TABLE« menu, switch
over to the list view with »●« (yellow).
5 Select the channel to be locked with
»
C
«
or
»
D
«.
6 Select the column
»Lock« with »
B
« or »
A
«
and press
»OK« to lock the channel.
7 Enter the PIN code
»1234« with »1...0«.
– The channel is marked using
»●«.
Note:
7
To remove the lock, select the channel again
with
»
C
« or »
D
«, press »OK« to confirm
and then enter the PIN code 1234 using
»1...0«.
8 Press
»M« to end the setting.
Updating software
(for digital channels only)
1 In the
»SETTINGS« menu, select the line
»Check For Updates updates« with »
C
« or
»
D
« and press »OK« to confirm.
– A search for new software will be made
and – if available – it will be installed.
Note:
7
If a search for software updates should be
made automatically, select the line
»Au-
tomatic OAD
« with »
C
« or »
D
« and use
»
B
« or »
A
« to select the option »On«.
– The software will be updated automati-
cally as far as possible.
2 Press
»M« to end the setting.
Restoring the television to the
default settings
This function allows you to delete the channel
lists and all custom settings.
1 In the
»SETTINGS« menu, select the line
»Restore Factory Defaults« with »
C
« or »
D
«
and press
»OK« to confirm.
2 Press
»●« (green) to confirm the warning
message.
– The
»Source Setup« menu appears.
3 Continue the settings with the chapter “Initial
set-up and tuning television channels” on
page 14.
