62
Receiving A Message
1. Press the SHIFT/CLR/MONITOR button and then
use the SELECT buttons or to select a
Direct Mode System. The SYStem display will
indicated the current System selected.
2. Use the SELect buttons or to select the
desired Channel. The radio is now ready to receive
message.
3. Press the SHIFT/CLR/MONITOR button twice
(“double click”) and hold to disable squelch and
monitor the channel. Adjust the VOLUME control to
the desired audio level.
Pressing the SHIFT/CLR/MONITOR twice (“double
click”) to monitor the channel may affect Busy Tone
signalling if programmed for the select channel.
NOTE
4. When a message is received (and the correct Busy
Tone signal is decoded, if programmed and enabled)
the receiver will unsquelch and the message will be
heard.
Sending A Message
1. Turn the radio on and set the desired System and
Channel as described in the previous section.
