35
PTT bar as soon as you stop talking. Messages
cannot be received when the PTT bar is pressed.
6. When the call is complete, double click the
SHIFT/CLR/MONITOR button to exit the Special Call
mode and return to the normal system/group display.
STORING INDIVIDUAL AND INTERCONNECT
NUMBERS
1. Press the key to put the radio into Special Call
mode. The radio displays the last accessed call
number from the pre-programmed Special Call
selection. The PHONE and
status flags will also
be illuminated while in the Special Call Mode.
2. Enter the ID number or telephone to be stored. The
last digit entered will always be displayed in the far
right hand side of the display. Any previously
entered digits will scroll left. Only the last seven
digits will be visible at a time with the leading digit
scrolling off the display upon each new key entry. To
backspace and clear a digit, press the key.
3. Complete the entry by pressing the key for
individual numbers and the key for telephone
interconnect numbers. The key indicates the
digits entered are for an individual call and key
