40
Scan must be disabled to add a Group to the scan
list.
NOTE
DELETE GROUPS
1. Select the desired Group to be deleted. If the
current group is already included in the scan list, the
flag will be illuminated.
2. To delete the group from the scan list, press the
SHIFT/CLR/MONITOR button and then press the
key. The flag will turn off and the group will
be removed from the scan list.
WIDE AREA AND PRIORITY SYSTEM SCANNING
(OPTIONAL)
Radios operating within an EDACS system may be
programmed for Wide Area Scan operation for multi-site
applications. Upon the loss of the currently selected
system’s control channel, radios may be programmed to
automatically scan other systems. If a new control
channel is found, the radio will switch to the new system
and sound and alert tone. Group selection may change
upon switching to the new system.
The radio may also be programmed for priority wide
area system scan. A priority system may be assigned to
each system programmed into the radio. Radios
programmed in this manner will scan the priority trunked
