56
STORING INDIVIDUAL AND INTERCONNECT
NUMBERS
1. Press the key to put the radio into Special Call
mode. or to put the radio into Conference Call
mode. The radio displays the last accessed call
number from the preprogrammed Special Call
selection. The PHONE and flags will also be
displayed. If no Special Calls are programmed the
radio displays SPC CAL.
2. Enter the tone set (individual call) or telephone
number to be stored. The last digit entered will
always be displayed in the far right hand side of the
display. Any previously entered digits will scroll left.
Only seven digits will be visible at a time with the
leading digit scrolling off the display upon each new
key entry. To backspace and clear a digit, press the
key.
To recall the last interconnect number entered
manually from the key pad, press the key.
NOTE
