23
Autokey below).
Autokey
(EDACS)
When the PTT is keyed to place a
call on the system, but the PTT is
released before getting to the
channel (e.g. a queued call), the
radio automatically keys on the
channel when it gets the assignment.
The radio generates a long beep and
holds the transmitter keyed for two
seconds. Pressing the PTT button
keeps the channel and sends the
message before this two second
time-out has expired.
System Busy EDACS - If you key the PTT bar and
hear three short, medium pitched
tones, this indicates that the
receiving party is already engaged in
another call or the system is busy
and its queue is full. You must rekey
later to access the system.
GE-MARC - If you key the PTT bar
and hear a low frequency tone for 1
second this indicates all channels are
busy.
Call Denied
(EDACS)
A single low pitch beep will sound
when the PTT switch is keyed and
the request is denied by the system.
This happens if the unit is an invalid
user or if the unit is requesting an
