Zenoah PSJ2300 Pole Saw User Manual


 
9
English
speed of the engine above the
level necessary.
3. Never operate the pruner at an
angle greater than 60° in order to
reduce the risk of being struck by
falling objects during operation.
4. If the unit start to shake or vibrate,
turn off the engine and check the
whole unit. Do not use it until the
trouble has been properly
corrected.
5. Keep all parts of your body away
from rotating cutting attachment
and hot surfaces.
6. Never touch the muffler, spark
plug, or other metallic parts of the
engine while the engine is in
operation or immediately after
shutting down the engine. Doing
so could result in serious burns or
electrical shock.
IF SOMEONE COMES
1. Guard against hazardous
situations at all times. Warn adults
to keep pets and children away
from the area. Be careful if you are
approached. Injury may result from
flying debris.
2. If someone calls out or otherwise
interrupts you while working,
always be sure to turn off the
engine before turning around.
MAINTENANCE
1. In order to maintain your product
in proper working order, perform
the maintenance and checking
operations described in the
manual at regular intervals.
2. Always be sure to turn off the
engine before performing any
maintenance or checking
procedures.
(1) Check ok !
The metallic parts reach high
temperatures immediately after
stopping the engine.
3. When replacing the cutting
attachment or any other part, or
when replacing the oil or any
lubricant, always be sure to use
only ZENOAH products or
products which have been
certified by ZENOAH for use
with the ZENOAH product.
WARNING
4. Safety precautions
警 告
中 文
4. 正确使用须知
3. 切勿以超过 60 度的角度操作修枝剪,
以避免操作时被坠物砸到的危险。
4. 如果本机开始抖动或振动,请关闭
引擎并检查整个机器。在故障被正确
排除之前请勿使用。
5. 请使您身体的所有部位远离旋转的
切割装置和灼热的切割表面。
6. 在引擎运行时或关闭引擎后的瞬间,
切勿触碰消音器、火花塞或引擎的其
它金属部件。否则可能导致严重的灼
伤或触电。
●如果有人进入工作区域
1. 请随时警惕是否有危险情况发生。警
告成人将宠物与儿童带离工作区域。
请注意,如果有人靠近,飞溅的碎屑
可能导致人身伤害。
2. 如果有人在您工作时召唤或打断您,
请务必在转身之前先关闭引擎。
■检修
1. 为了保证您的产品正确工作,请定期
执行本手册中所述的检修和检查操作。
2. 在执行任何检修或检查步骤之前,
请务必先关闭引擎。
(1)可以检查!
停止引擎后金属部件将立即升温。
3. 当更换切割装置或任何其它部件时,
或更换燃油或润滑油时,请务必仅使
用 ZENOAH 产品或经 ZENOAH 认
证可用于 ZENOAH 的产品。