Filter
Top Products
7
English
Repetitive Stress Injury(RSI)
could occur.
If you feel discomfort, redness
and swelling of your fingers or
any other part of your body, see
a doctor before getting worse.
2. To avoid noise complaints, in
general, operate product
between 8a.m. and 5p.m. on
weekdays and 9a.m. to 5p.m.
weekends.
Check and follow the local
regulations as to sound level and
hours of operations for the product.
■ BEFORE STARTING THE
ENGINE
1. Operate the chain saw only in well
ventilated areas. Never start or run
the engine inside a closed room or
building. Exhaust fumes contain
dangerous carbon monoxide.
2. The area within a perimeter of 15
m of the person using the product
should be considered a hazardous
area into which no one should
enter. If necessary yellow warning
rope, warning signs should be
placed around the perimeter of the
area. When work is to be
performed simultaneously by two
or more persons, care should also
be taken to constantly look around
or otherwise check for the
presence and locations of other
people working so as to maintain a
distance between each person
sufficient to ensure safety.
3. Check the condition of working
area to avoid any accident by
hitting hidden obstacles such as
stumps, stones, cans, or broken
grass.
Remove any obstacle before
beginning work.
4. Inspect the entire unit for loose
fasteners and fuel leakage. Make
sure that the cutting attachment is
properly installed and securely
fastened.
5. Always use the shoulder strap.
Adjust the strap for comfort before
starting the engine. The strap
should be adjusted so the left
IMPORTANT
NOTE
4. Safety precautions
重 要
补 充
2. 为了避免工作噪音影响他人，操作
本产品的合适时间一般应为工作日的
上午 8 点至下午 5 点以及周末的上
午 9 点至下午 5 点。
关于噪音等级以及工作时间，请查询并
遵守当地的法规。
■启动引擎之前
1. 仅可在通风良好的区域操作链锯。切
勿在密闭的房间或建筑中启动或运行
本产品。因为链锯排出的废气中含有
有害的一氧化碳。
2. 以使用本产品的人员为圆心，15 米
为半径的圆周范围内为危险区域，严
禁他人进入。如有必要，应在该区域
周围放置黄色的警示绳索或警告标记。
当由两人或两人以上同时进行工作时，
应注意经常查看四周或检查其它工作
人员的工作位置，每位工作人员之间
应保留足够的距离以确保安全。
3. 检查工作区域的条件，以免由于意
外碰撞到诸如树桩、石块、罐头或碎
草等障碍物而导致意外事故。
在开始工作之前请清除所有障碍物。
4. 检查整个机器的紧固部件有无松动，
燃料是否有泄漏。务必确保切割装置
正确安装并牢牢紧固。
5. 请务必使用肩带。在启动引擎之前
调整肩带直至感觉舒适。肩带经调整
后应使长柄锯的把手高度约于腰齐，
以便左手持握。
中 文
4. 正确使用须知