Filter
Top Products
20
English
7. Operation
■ ADJUSTING IDLING SPEED
(OP9)
1. When the engine tends stop
frequently at idling mode, turn the
adjusting screw clockwise.
2. When the cutting head keeps
rotating after releasing the trigger,
turn the adjusting screw counter-
clockwise.
(1) Idle adjusting screw
• Warm up the engine before
adjusting the idling speed.
•Always wear work gloves made
of leather or some other sturdy
material when using the
polesaw.
• Falling branches may fall onto
the face or into the eyes,
resulting in injuries, scratches,
and cuts, and for this reason
you should always be sure to
wear a helmet and face
protector when using your
polesaw.
WARNING
NOTE
OP9
补 充
警 告
中 文
■调节空转速度（OP9）
1. 如果在空转模式中引擎经常趋于停止，
请顺时针转动调节螺钉。
2. 如果在释放扳机之后切割头仍然旋
转，则请逆时针转动调节螺钉。
（1）空转调节螺钉
・在调节空转速度之前请先预热引擎。
・使用长柄锯时请务必佩戴由皮革或其
它坚固的材料制成的工作手套。
・掉落的分枝可能会落到操作者的脸上
或眼睛里，从而导致受伤、刮伤和切
口。因此当使用长柄锯时请务必穿戴
头盔和面罩。
7. 操作