Zenoah PSJ2300 Pole Saw User Manual


 
27
Case 1. Starting failure
CHECK PROBABLE CAUSES ACTION
fuel tank incorrect fuel drain it and with correct fuel
fuel filter fuel filter is clogged clean
carburetor adjustment screw out of normal range adjust to normal range
sparking (no spark) spark plug is fouled/wet clean/dry
plug gap is incorrect correct (GAP: 0.6 – 0.7 mm)
spark plug disconnected retighten
Case 2. Engine starts but does not keep running/Hard re-starting.
CHECK PROBABLE CAUSES ACTION
fuel tank incorrect fuel or staled fuel drain it and with correct fuel
carburetor adjustment screw out of normal range adjust to normal range
muffler,cylinder (exhaust port) carbon is built-up wipe away
air cleaner clogged with dust wash
cylinder fin, fan cover clogged with dust clean
When your unit seems to need further service, please consult with our service shop in your area.
English
9. Troubleshooting guide
中 文
故障案例 1. 启动失败
检查项目 可能的原因 故障排除方法
燃料箱 燃料不正确 将错误的燃料倒出,倒入正确的燃料
燃料过滤器 燃料过滤器堵塞 清洁过滤器
化油器调节螺钉 超出正常范围 调节至正常范围
有火星(无火星) 火星塞淤塞/潮湿 清洁火星塞/使其干燥
火星塞间隙不正确 将其调节正确(间隙:0.6-0.7mm)
火星塞 连接断开 将其重新紧固
故障案例 2. 引擎启动,但无法持续运行。/重启(硬启动)。
检查项目 可能的原因 故障排除方法
燃料箱 燃料不正确或变质的燃料 将其倒出并倒入正确的燃料
化油器调节螺钉 超出正常范围 调节至正常范围
消音器、汽缸(排气口) 碳的堆积 将其擦拭干净
空气滤清器 被灰尘堵塞 清洗空气滤清器
汽缸散热片,风扇盖 被灰尘堵塞 对其进行清洁
如果您的机器需要更多维修服务,请联系您所在地区的维修服务商店。
9. 故障排除指南