Filter
Top Products
9
■ CONNECTING SWITCH WIRES
• Connect the switch wires between the engine and the
main unit.
■ INSTALLING DEBRIS GUARD
1. Fit the guard skirt on debris guard.
2. Attach the debris guard with the bolts provided to the
pipe.
■ INSTALLING LINE HEAD
1. While locking the gear shaft by inserting the
hexagonal bar into the holder A on the gear box,
loosen and remove the nut (left-handed) and holder
B.
2. Fit the line head assembly to the gear shaft. Tighten
it securely by hand.
(1) Hexagonal
bar
(2) Holder A
(3) Holder B
Guard skirt
for line head only
SE5
• Assemble each part correctly. Wrong assembly
might cause an accident.
• If you cannot do the assembling yourself, consult
the shop where you bought this product.
■ ENGINE
• Using attached 4 socket screws, secure the
connection firmly with equal force.
■ HANDLE
1. Loosen the 4 bolts on the upper cap and insert the
handles equally. Retighten the bolts.
2. Put the handle assembly into the bracket and put the
upper cap over it. Tighten the cap securely.
■ CONNECTING THROTTLE WIRE
1. Remove the air cleaner cover.
2. Connect the end of the throttle wire to the joint on the
top of the carburetor.
WARNING
5. Set up
SE1
SE2
SE3
1.
2.
SE4
SE6