Filter
Top Products
4
For safe operation and maintenance, symbols are
carved in relief on the machine. According to these
indications, please be careful not to take a mistake.
(a) The port to refuel the "MIX GASOLINE"
Position: FUEL TANK CAP
(b) The direction to close the choke
Position: AIR CLEANER COVER
(c) The direction to open the choke
Position: AIR CLEANER COVER
2. Symbols on the machine
3. Specifications
ZENOAH Brushcutter
Name/Type
KAM-402
Handle Type Double
Machine Weight (✽1) kg 7.8
Outward Size (L x W x H) mm 1845 x 650 x 560
Outer pipe mm 1500 / ø28
Applied Head
2-teeth blade(12”), 4-teeth blade, 8-teeth blade, round saw blade(10”), line head
Power Transmission Method Automatic centrifugal clutch, spiral gear
Reduction Rate 1.400 (21 : 15)
Blade Rotating Direction Counterclockwise (from operator' s view)
Type Single cylinder air cooling 2-cycle gasoline engine
Displacement Volume cc 41.5
Fuel Tank Capacity 0.94
Fuel Used Lubricating oil mixed gasoline
Lubricating Oil Used 2-cycle engine oil
Engine Mixing rate when using ZENOAH genuine oil (FC grade): 50:1
when using market oil (FB grade): 25:1
Carburetor float, piston valve
Sparking Method C D I
Spark Plug NGK BPMR7A
Starting Method Recoil starter
Stopping Method Sparking Circuit Primary Short (push button)
(✽1) excluding cutting head, shoulder strap and fuel
Please note that due to improvement, detailed specifications of the product may differ from the information herein.