Installation
2–2 975-0053-01-01
Installation Planning
Overview
Before you begin to install the Sun Tie XR you need to consider the
following:
• tools required
• hardware and materials required
• mounting location
• routes for AC and DC wiring
• AC and DC connection wire size requirements
• grounding requirements
• PV array requirements
Tools required
Hardware and materials required
❐ wood screws and washers (supplied)
❐ metal conduit and appropriate fittings
❐ anchors for screws (material dependent)
❐ Phillips screwdrivers ❐ level
❐ slot-head screwdrivers ❐ wire strippers
❐ open-end wrenches ❐ torque wrench
❐ socket wrench and fittings ❐ electrical tape
❐ 3/32" hex bit
❐ pencil
❐ multimeter ❐ utility knife
❐ frequency counter (optional)