Filter
Top Products
MAN0556 (9/21/2007)
Dealer Check Lists 25
DEALER CHECK LISTS
PRE-DELIVERY CHECK LIST
(Dealer's Responsibility)
Inspect the loader thoroughly after assembly to be cer-
tain it is set up properly before delivering it to the cus-
tomer. The check lists are a reminder of points to
inspect. Check off each item as it is found satisfactory
or after proper adjustments are made.
___ Check all bolts to be sure they are properly
torqued.
___ Check and grease all lubrication points. See “.
Lubrication Points” on page 22.
___ Check that shields and guards are properly
installed and in good condition. Replace if dam-
aged.
___ Check that all cotter pins and safety pins are
properly installed. Replace if damaged.
___ Properly attach implement to tractor and make all
necessary adjustments.
___ Check all hydraulic hoses, fittings, tubing, and
cylinders for any leaks or damage. Be sure quick
couplers operate properly. Make sure hydraulic
valve matches tractor hydraulic system - open
system or closed system.
___ Check parking stand for proper operation.
___ Check that all safety decals are installed and in
good condition. Replace if damaged.
___ Check that all loader mounting decals are prop-
erly installed on left loader mount.
___ Make sure all hydraulic fittings are tight and
hoses are properly routed and not twisted, bent
sharply, kinked or pulled tight.
___ Make sure loader operates as recommended.
See operation section. Make necessary changes
in hydraulic hook-ups to obtain loader operation.
Cycle loader (all functions). Bleed air from
hydraulic system. Cycling loader removes air
from system. After cycling loader, check hydraulic
system oil level.
DELIVERY CHECK LIST
(Dealer's Responsibility)
___ Present Operator's Manual and request that cus-
tomer and all operators read it before operating
equipment. Point out the manual safety rules,
explain their meanings and emphasize the
increased safety hazards that exist when safety
rules are not followed.
___ Show customer how to make adjustments.
___ Instruct customer how to lubricate and explain
importance of lubrication.
___ Explain to customer the potential crushing haz-
ards of going underneath raised equipment.
Instruct customer that service work does not
require going underneath unit and never to do so.
___ Show customer the safe, proper procedures to be
used when mounting, dismounting, and storing
equipment.
___ Point out the correct mounting and routing of
hydraulic hoses. Explain that during operation,
mounting, dismounting and storage, care must be
taken to prevent hose damage from pulling, twist-
ing and kinking.
___ Make customer aware of optional equipment
available so that customer can make proper
choices as required.
A Delivery Report and Registration form must be filled
in by dealer and signed by both dealer and purchaser
at time of delivery. Be sure Operator's Manual remains
with loader. Deliver it to customer with loader.