Filter
Top Products
4 Introduction
15916 (Rev. 3/30/2007)
SPECIFICATIONS
D080-2 (Towed) MD080-2 (Mounted)
Cutting Width 80" 80"
Cutting Height 2" - 14" 2" (Limited by tractor lift)
Overall Width 83" 83"
Offset to Right of Hitch 63" 63"
Overall Length 127" 95"
Cutter Blade Spindles 2 2
Blade Tip Speed (feet per minute) 14,400 14,400
V-Belts 4 4
Framework Channel 5/16" 5/16"
Spindle Shafts 1-3/8" 1-3/8"
Gearbox 60 HP 60 HP
TRACTOR REQUIREMENTS
DO80-2 (Towed) MDO80-2 (Mounted)
Tractor PTO RPM 540 540
3-Point Hitch N/A Category 1
(Category 2 Optional)
GENERAL INFORMATION
The purpose of this manual is to assist you in operating
and maintaining your rotary cutter. Read it carefully. It
furnishes information and instructions that will help you
achieve years of dependable performance. These
instructions have been compiled from extensive field
experience and engineering data. Some information
may be general in nature due to unknown and varying
operating conditions. However, through experience
and these instructions, you should be able to develop
procedures suitable to your particular situation.
The illustrations and data used in this manual were cur-
rent at the time of printing, but due to possible inline
production changes, your machine may vary slightly in
detail. We reserve the right to redesign and change the
machines as may be necessary without notification.
■ Some illustrations in this manual show the
equipment with safety shields removed to provide
a better view. The equipment should never be oper-
ated with any safety shielding removed.
WARNING