Filter
Top Products
User manual W3532
- 4 -
Important!
Responsibility
1) Persons under 18 and any person who do not fulfil the
conditions of operation are not permitted to use the
self-moving rotary cutter.
2) The user is responsible for any damage caused by a
third person during the unauthorized operation of the
machine.
3) The self-moving rotary cutter must be used in the
respective manner for the purposes stated in this
Manual. Each misuse has the consequence of the
expiration of the warranty and the rejection of the
responsibility of the producer.
4) The self-moving rotary cutter is equipped with a
series of micro switches and safety equipment into
which it is not permitted to intervene. This would
lead to the expiration of the warranty and the rejection
of the responsibility of the producer.
5) The self-moving rotary cutter must not be used on
roads (1
st
, 2
nd
and 3
rd
class roads and highways).
Transport to the working place is possible, e.g. on the
trailer of a private car or tractor.
Safety rules during operation
1) Wear appropriate clothes and shoes
2) The self-moving rotary cutter is to be activated in a
clear or well ventilated area. Burnt exhaust gases are
toxic!
3)
Attention! Do not activate the cutting mechanism
of the self-moving cutter in the lower position.
Before activation lift the cutting mechanism
minimally into the 3
rd
position of the lifting lever
of the cutting mechanism; then lift the drive of the
cutting mechanism or you can lower the cutting
mechanism into the lowest position.
4) Add fuel only the engine is switched off in clear or
well ventilated premises. Fuel vapours are explosive!
5) Do not manipulate with fire and do not smoke
near the tank.
6) If the self-moving rotary cutter is not used for cutting
grass, it is necessary to disconnect the blades and to
lift the cutting mechanism to the highest position.
7) The transport of persons is forbidden.
8) Before each use it is necessary to check that the
blades are firmly tightened and sharpened.
9) Before starting work, the working area must not
contain other items, such as stones, branches, etc.
10) It is possible to use the self-moving rotary cutter for
cutting only in the case that the bin for cut grass or the
cover against stones are connected.
11) During cutting there must not be any persons or
animals within the range of the working area.
12) It is permitted to use the self-moving rotary cutter on
slopes with a maximum 10°(17%).
13) Each time you remove cut grass from the bin, the
drive of the cutting mechanism must be disconnected
and it is necessary to wait until the blades have
stopped.
14) Do not make any intervention into the engine for the
purpose of increasing the output and the revolutions.
15) Before getting off the self-moving cutter it is
necessary to disconnect the drive of the cutting
mechanism and to wait until the blades have stopped.
Remove the key from the ignition before leaving the
machine unattended.
16) During breaks which are necessary due to health
reasons, the employee must not be affected by the
excessive noise and vibrations.
17) In the case of professional use (or in the case of
exceeding the maximum time of exposure according
to point 15), it is necessary to submit to the
respective body of the hygiene service, the
proposal for the specification of work as risky
work in terms of noise and vibrations.
18) Near residential buildings the machine can only be
operated between 6:00 a.m. – 6:00 p.m.
ATTENTION!
When working with the accumulator, keep to the safety
precautions of the producer. The electrolyte in the
accumulator is a caustic agent.
Safety rules when the machine is disconnected
and during maintenance
1) Never leave the ignition key within the reach of
children and unauthorized persons.
2) Repair, maintenance, treatment and cleaning can be
performed only when the ignition key has been
removed from the ignition box.
3) Sharpen both blade edges and take care with the
balancing of the blades.
4) Deformed or damaged blades must be replaced and
must not be repaired. Use only original brand
knives.
2. Marking and technical service