Filter
Top Products
User manual W3532
- 20 -
CUTTING MECHANISM
Working action After each
cutting
After the first
5 hours
Weekly
checking
Monthly
inspection
After each 50
hours
After each 100
hours
After each
season
- checking the sharpening and
tightening of blades
•
• • • • •
- checking the tightening of the toothed
belts
•
• • • •
- lubrication of bearings for the
clamping of blades
• • • •
- checking the tightening and
adjustment of the electromagnetic
clutch
•
• • • •
- checking for any possible damage of
the cutting mechanism
•
REAR AXLE
Working action Before
commissioning
(new cutter)
After the first
5 hours
Weekly
checking
Monthly
inspection
After each 50
hours
After each 100
hours
After 500
hours of
operation
- replacement of oil (oil PP 90)
•
- checking the status of the driving
chain
•
- replacement of the driving chain
•
*
* In the case of work on a hilly terrain after each 400 hours of operation.
TRANSPORT CHANNEL AND BAG
Working action After each
cutting
After the first
5 hours
Weekly
checking
Monthly
inspection
After each 50
hours
After each 100
hours
After each
season
- checking the function of the
automatic system for the disconnection
of the cutting mechanism (cleaning of
the channel)
• • • •
- cleaning of the bag fabric
• • • • • •
- checking damage to the bag fabric
•
- lubrication of the rotary points of the
bag
• • • •
- checking the function of the electric
engine for lifting (only for electric
lifting)
• • • •