Filter
Top Products
www.clearcreekspas.com
www.clearcreekspas.com
OPERATION
Controls
A switch panel giving you convenient control of the
whirlpool filter, heater/filter, blower and light is located
under the tinted acrylic cover on the rim of the spa.
To ensure your safety and allow easy operation, your
spa is equipped with two air-activated switches. One, the
SYSTEM switch, controls the whirlpool jets, heat, and
filtration. The other switch, ACC (Accessory) controls the
air blower and the light.
System
The SYSTEM switch controls the following four func-
tions in the continuous sequence indicated:
1. OFF
2. JETS
3. HTR/FILTER
4. FILTER
(The next selection is OFF again.)
Use the JETS function as a reference to indicate your
location in the function sequence, since that function is the
most obvious when operating.
For best performance and increased equipment life,
pause a second or two between pushbutton selections
.
ACC (Accessory)
The ACC (Accessory) switch controls these functions in
this sequence.
1. OFF
2. AIR
3. AIR/LIGHT
4. LIGHT
THERMOMETER
TEMPERATURE
READOUT
BATTERY
CONTROL PANEL
OFF
(Time clock controls
filter pump. Heater
will turn on with
filter pump if thermostat is
set.)
JETS
(Maximum whirlpool action.
Heater will maintain
temperature set by
thermostat.)
TEMP.
CONTROL
KNOB
ACCESSORY
SWITCH
(Controls AIR
B
l
o
w
e
r
a
nd
LIGH
T
functi
ons.)
SYSTEM
SWITCH
(Controls JETS,
HTR/FLTR and FILTER only
functions.)