Filter
Top Products
44
TROUBLESHOOTING
Auto-diagnostic module with multiple detection levels, in.scan continu-
ously reads current at input to monitor breaker status. It also identies
corrective actions by displaying error codes on the box display.
All errors will be displayed on the keypad and on the in.xm display,
which ever is the easiest to read when troubleshooting is required.
When displaying error codes, both the device ID and its related error
code are displayed alternately. If there are more than one active error,
the one with the highest priority is displayed.
Display with two
7-digit characters
Service menu enabled
Change Button
Select Button
Something is wrong
and the system should
be checked.
Everything is ok!