Whirlpool 11-0086-11 Hot Tub User Manual


 
25
In order to warn the user, the spa light will
ash for a few seconds before the exit of
Standby mode and restart the pumps. The
"Stby" message is also displayed during
Standby mode.
*Pump will stay turned on if there is a
request for more heat..
Standby key
Standby Mode: When this feature is
activated, it allows to stop all pumps at the
same time by a simple click of a button!.
Use On / Off key to pause all pumps*
Progress bar will display the remaining
time before the system automatically exits
Standby mode (user can also exit Standby
mode at any time by pressing again on On
/ Off key.)
Pump 1 key
Press Pump 1 key to turn Pump 1 on at
high speed.
Press a second time to turn pump off.
A built in timer automatically turns pump off
after 20 minutes, unless pump has been
manually deactivated rst
Pump 2 key
Press Pump 2 key to turn Pump 2 on at
high speed.
Press a second time to turn pump off.
A built in timer automatically turns pump off
after 20 minutes, unless pump has been
manually deactivated rst
SPA FUNCTIONS
Pump 3 key
IPress Pump 3 key to turn Pump 3 on at
high speed.
Press a second time to turn pump off.
A built-in timer automatically turns pump off
after 20 minutes, unless pump has been
manually deactivated rst