Filter
Top Products
6
Motor Housing
Shield
Line Limiter
Pin
Cutting Head
2. Align the installation arr ow on the shield
with the installation arrow on the motor
housing as shown.
Installation
arrows
3. Twist t heshield asillustrateduntil itsnaps
securely into place. M ake sure t heshield
is assem bled to the unit as shown i n the
illustration below and in the KNOW
YOUR TRIMMER sectionof this manual.
WHEEL ASSEMBLY
1. Fit the two halves of the wheel togethe r
(see illustration).
Wheel
2. At tach the wheel to the tr im m er. Make
sure the wheel is fitted into the grooveon
the motor housing.
Groove
Motor
Housing
3. Clip the wheel together securely on the
other side. The wheel should turn freely.
INSTALLATION OF ASSIST HANDLE
1. Pr ess the two butt ons on the sides of the
switch handle.
Button
Button
Assist Handle
2. Push the assist handle over the buttons
and release the buttons.
3. Adjustthe handleto t hemostcomfortable
operatingposit ionby pressing thebuttons
and moving the handle.
ATTACHING THE SHOULDER
STRAP
1. Fasten the shoulder st rap hook to the re-
tainer on the switch handle.
Retainer
Shoulder
Strap Hook
2. Adjust as required to ensure the shoulder
strap is in the most comfortable position.
HEIGHT ADJUSTMENT
1. Turn height adjuster in the direction indi-
cated to unlock (see illustration).