Filter
Top Products
4.12 WATLOW Series 988 User’s Manual
Setup Menus, Chapter 4
Setup-Input
Default Default Default Default
↓↓ ↓↓
[``°F] [``°C]
[`rL2] [`rH2] [`rL2] [`rH2]
[```J] [``32]…[1500] [```0]…[`816] 98_ _-1_ _-_ _ _ or
[`in2] [`rL2] [`rH2] [`rL2] [`rH2] 98_ _-2_ _-_ _ _
(K)
[```H] [-328]…[2500] [-200]…[1371]
[```t] [-328]…[`750] [-200]…[`399]
[```n] [``32]…[2372] [```0]…[1300]
[```E] [-328]…[1470] [-200]…[`799]
(W5)
[```C] [``32]…[4200] [```0]…[2316]
(W3)
[```d] [``32]…[4200] [```0]…[2316]
[`Pt2] [``32]…[2543] [```0]…[1395]
high impedance
[0-50] [-999]…[`999] [-573]…[`573]
[```r] [``32]…[3200] [```0]…[1760] 98_ _-2_ _-_ _ _ only
[```S] [``32]…[3200] [```0]…[1760]
[```b] [``32]…[3300] [```0]…[1816]
[`rtd] [-328]…[1472] [-200]…[`800]
[`r†d] [-9(9]…[99(9] [-7#3]…[53&7]
[4-20] [-999]…[9999] units
[0-20] [-999]…[9999] units
[`0-5] [-999]…[9999] units
[`1-5] [-999]…[9999] units
[0-10] [-999]…[9999] units
[0-50] [-999]…[9999] units
[0=00] [-999]…[9999] units
slidewire
[SLid] [`100]…[1200] ohms
current
[Curr] [```0]…[``50] amps
potentiometer
[`POt] [```0]…[1200] ohms
˜
NOTE:
These values do not
affect the low or the
high set point limit
for process alarms.
[`rL2]
[`rH2]
Range Low 2 and
Range High 2 con-
tinued from previ-
ous page.
˜
NOTE:
When high imped-
ance [0-50] is
selected for input 1
the range high for
both [``°C] and
[``°F] can be
extended to
[9999].
The range low when
[``°C] is selected
can be extended to
[-999].
C4.wc 5/14/1999 8:48 AM Page 4.12