Filter
Top Products
Service
7
Belt Replacement
Auger Belt
as follows:
Allow the engine to run until it is out of fuel. Do not
attempt to pour fuel from the engine. Remove the key to
avoid unintended starting.
Remove the plastic belt cover on the front of the engine by 2.
Roll the auger belt off the engine pulley. See Fig. 7-2.3.
Carefully pivot the snow thrower up and forward so that it
rests on the auger housing.
Remove the frame cover from the underside of the snow 5.
thrower by removing the self-tapping screws which secure
it. See Fig. 7-3.
Loosen and remove the shoulder bolt which acts as a.
a belt keeper.
Unhook the auger brake bracket spring from the b.
frame.