Filter
Top Products
Rev. A6.1
Workman MD/MDX Drive Train
Page 5 --
Drive Clutch Removal Tool (Serial Number Above 310000000)
This tool is required to remove the drive clutch from the
tapered drive shaft of the engine. It is placed in the
threaded hole of the fixed clutch sheave after the clutch
holding cap screw is removed.
Toro Part Number: TOR6013
NOTE: Vehicles with a serial number above
310000000 are equipped with a TEAM brand drive
clutch.
Figure 8.1
Drive Clutch Spider Removal Tool Kit (Serial Number Above 310000000)
This kit is required to remove the drivec lutch spider from
the post of the fixed sheave. Kit includes spanner and
clutch holding bar.
Toro Part Number: TOR6016
NOTE: Vehicles with a serial number above
310000000 are equipped with a TEAM brand drive
clutch.
1. Holding bar 2. Spanner
Figure 8.2
1
2
Drive Train