Filter
Top Products
Rev. B
Workman MD/MDX Page 6 -- 31 Electrical System
15.Secure A1 and A2 terminals to commutator end
head with fiber washer, flat washer, lock washer and nut
on each terminal. Torque nuts from 40 to 50 in--lb (4.6
to 5.6 N--m).
Figure 43
16.Secure commutator end head assembly to frame
housing with two (2) screws. Use m arks placed on end
head and housing to properly orientate head. Torque
screws from 49 to 66 in--lb (5.6 to 7.4 N-- m).
Figure 44
17.Position the starter/generator on the commutator
end head and support the assembly to prevent damage
to the terminals in the end head.
Figure 45
Electrical
System