Filter
Top Products
Start Up
Getting Started
1Ć6
Self Test
Check the self test results. The digitizing oscilloscope automatically perĆ
forms powerĆup tests each time it is turned on. It will come up with a display
screen that states whether or not it passed self test. (If the self test passed,
the status display screen will be removed after a few seconds.)
If the self test fails, call your local Tektronix Service Center. Depending on
the type of failure, you may still be able to use the oscilloscope before it is
serviced.
Power Off
Toggle the ON/STBY switch to turn off the oscilloscope.