Filter
Top Products
Hardcopy
Reference
3Ć64
5. Type: IBRDF <Filename>where <Filename> is a valid DOS file name
you want to call your hardcopy information. It should be v8 characters
long with up to a 3 character extension. For example, you could type
ibrdf screen1".
6. Exit the IBIC program by typing: EXIT
7. Type: COPY <Filename> <Output port> </B> where <Filename> is
the name you defined in step 5 and <Output port> is the PC output
port your hardcopy device is connected to (such as LPT1 or LPT2).
Copy the data from your file to your hardcopy device. First, ensure your
printer or plotter is properly attached to your PC. Then copy the file. For
example, if your file is called screen1 and your printer is attached to the
lpt1 parallel port, type copy screen1 lpt1: /B".
NOTE
If you transmit hardcopy files across a computer network, use a
binary (8Ćbit) data path.
Your hardcopy device should now print a picture of the digitizing oscilloĆ
scope screen.
See Remote Communication, on page 3Ć116.
For More
Information