Filter
Top Products
10
MAXIMUM / MINIMUM MEMORY
Press the “MEMORY” button on the front of the home receiver
repeatedly to view the maximum & minimum values of temperature,
humidity, heat index or dew point readings. To clear the memory
record, hold the “MEMORY” button while the respective values are
displayed onscreen.
TEMPERATURE & HUMIDITY TREND INDICATORS
One of 3 Trend Indicator arrow icons display near the temperature
and the humidity display.
indicates: Rising Temperature readings if the change is more
than 2 degrees in an hour
indicates: Steady Temperature readings
indicates: Falling Temperatures if the change it is more than 2
degrees in an hour.
INDOOR/OUTDOOR HEAT INDEX
The Heat Index combines temperature and relative humidity for an
“apparent” temperature, or how hot the heat-humidity combination
actually feels.
TO PROGRAM ALTITUDE
When first powered up, the receiver will automatically be in Altitude
Setting mode for one minute. For this minute, the Barometric Pressure
display will display “---“ and the 'hPa' icon will blink for one minute. To
input the current Altitude during Automatic Altitude Setting mode:
1. Press “p” or “q” to toggle to the desired Barometric Pressure
display ('mb', 'inHg', or 'hPa').
2. Press “PRESSURE” to confirm 'mb', 'inHg', or 'hPa'.
3. Press “p” or “q” to reach the current altitude height. (Note: Both
'mb' and 'hPa' altitudes will be expressed in meters, while 'inHg' is
expressed in feet.)
4. Press “PRESSURE” to confirm the altitude. The display will shortly
return to the Barometric Pressure display.
If an altitude is not entered within one minute of powering on, the
receiver will default to ‘hPa’ at an altitude of “0” (or when the
“RESET” button is pushed). To enter Altitude Setting mode again:
1. If not previously done, press “PRESSURE” to toggle to the desired
Barometric Pressure display ('mb', 'inHg', or 'hPa').
2. Press and hold the “PRESSURE” button for 3 seconds to enter
Altitude Setting mode. The display will change to the current altitude
setting. (Note: Both 'mb' and 'hPa' altitudes are automatically
expressed in meters, while 'inHg' is expressed in feet.)
3. Press “p” or “q” to reach the current altitude height. Press
“PRESSURE” to confirm the altitude. The display will shortly return
to the Barometric Pressure display.
How to read temperature and other displays (continued)