Filter
Top Products
Page 33
IMPORTANT: If freezing conditions exist and pump is not opera-
tional, take measures to protect the system from freeze damage. See
“Winterizing” (page 27).
POOR JET ACTION 1. Make certain the pump is on high speed.
(see III. 3 page 17) 2. Check position of massage selectors
3. Open air control for the jet system selected.
4. Check for adequate water level.
5. Check for dirty filter.
6. Check for dirty filters on all three pump 2
footwell suction covers.
WATER IS TOO HOT. 1. Reduce thermostat setting.
2. Reduce filtration cycle length. (Even without
heater on, water temperature can increase from
prolonged pump operation.)
NO HEAT 1. Check thermostat setting.
2. Keep the cover in place while heating.
3. If “heater on” indicator is lit (see Ill. 2.1), but no
temperature rise is experienced after a reason-
able period of time, contact your dealer or
authorized service center.
Your Authorized Sundance Dealer is a trained service repair center. Should
checking the above steps fail to correct the problem, please call your dealer
so that he may arrange service.
Your Sundance Dealer’s phone number:
Sundance builds the best hot tubs in the industry. Nonetheless, we are always
striving to improve the quality and features of our products. Your input as a
Sundance hot tub owner is a cherished part of this process. If you have any
comments or suggestions, or if you wish to be informed on any new products
for your hot tub, please write to us.
CONGRATULATIONS on your good taste and welcome to the happiest and
most relaxed family in the world!