Filter
Top Products
6
Section 1 - FAMILIARIZATION
FIGURE 1.1
1.1 INTRODUCTION
This manual has been prepared for the operator’s of the
SNAPPER MID MOUNT Z-RIDER. Its purpose, aside from
recommending standard operating procedures and routine
service requirements, is to promote SAFETY through the
use of accepted operating practices. Read, Understand and
Follow the IMPORTANT SAFETY INSTRUCTIONS on
Pages 2 thru 4 of this manual and All SAFETY messages on
the MID MOUNT Z-RIDER and its attachments before oper-
ating. SNAPPER recommends returning the MID MOUNT
Z-RIDER to an authorized SNAPPER dealer annually for
inspection and addition of any new devices which might
upgrade the safety of the mower.
1.2 NOMENCLATURE
The nomenclature information above, Figure 1.1, shows the
essential parts of the SNAPPER MID MOUNT Z-RIDER. It
is recommended that all operators of this equipment
become thoroughly familiar with the controls, components,
and operation of this machine before operating. Specific
details involving the engine are found in the separate engine
owner’s manual. Study these manuals before operating and
keep both handy for future reference. For the nearest
SNAPPER dealer in your area, check the yellow pages
under the heading LAWN MOWERS. For engine parts and
service, look for the engine manufacturer’s dealers under
the heading, ENGINES - gasoline.
BLADE SWITCH
KEY SWITCH
CHOKE CONTROL
HEADLIGHT
SWITCH
ENGINE SPEED
CONTROL
MOTION CONTROL
LEVER
MOTION CONTROL
LEVER
LEFT HAND FUEL
TANK
PARKING BRAKE
LEVER
CONTROL PANEL
(see inset)
RIGHT HAND FUEL
TANK
SEAT BELT
ROLL BAR
PROTECTIVE
STRUCTURE
OPERATOR’S
SEAT
HOUR METER
DECK HEIGHT
ADJUSTMENT PIN
DISCHARGE
DEFLECTOR
DECK LIFT PEDAL
HEADLIGHTS
IMPORTANT
The figures and illustrations in this manual
are provided for reference only and may
differ from your specific model. Contact
your Snapper dealer if you have questions.