Filter
Top Products
- 40 -
10.1 Oil Change
Remove Oil Filler cap
Loosen the engine oil drain plug and allow the oil to
drain fully
Reinstall the drain plug
Add oil from oil filler and fill up to the MAX level.
You should check the oil level on the oil gauge
Reinstall the filler cap hand-tight
<Caution>
For the types of engine oil to use and volume to
replace, refer to 8-1 Checking Engine Oil
10.2 Oil Filter Change
First time 50 hour mark
From second time Every 400 hours
Drain the engine oil fully, as described in 10.1
Loosen and remove the oil filter, using an oil filter wrench
Smear a little engine oil on the rubber gasket of the new oil
filter
Screw the new filter into place and tighten it by hand until the
gasket contacts the seat. Then, give it additional 3/4 - 1 turn
to seat the filter, using an oil filter wrench
Add oil and install filler cap
<Caution>
If an oil filter wrench is not available, contact our authorized
distributor or our engineering section.
Oil filter
ISUZU Part No.
1132402321
First time 50 hour mark
From second time Every 200 hours
OIL FILLER CAP
OIL FILLER
OIL GAUGE
OIL DRAIN PLUG