Filter
Top Products
Assembly Section 3-12
ASSEMBLY
© 2004 Alamo Group Inc.
ASSEMBLY
Turf Flex 08/01
ROPE ROUTING FOR AUTOMATIC HEAD LOCKS
Attach rope ends to latch at location shown in figure 18.
Latch Angle
Lift Arm Pin
Ref. Hole
NOTE:
11' Model Only
FIGURE 18
Latch Bolt
wing
arm
Latch
Clear-
ance
Adjust Latch Bolt to
provide minimum
clearance between
Reference Hole and
Latch. Over adjust-
ment (too much
clearance between
Wing Arm and Latch)
may cause inproper
contact between Lift
Arm Pin and Latch
Angle. Not enough
clearance will cause
damage to Latch arm
when heads are
raised.