Filter
Top Products
Assembly Section 3-5
ASSEMBLY
© 2004 Alamo Group Inc.
ASSEMBLY
Turf Flex 08/01
CASTER WHEEL ATTACHMENTS
REAR MOWER (FIGURE 8)
Attach the right and left Axle Arm
Weldment (1) to the deck with 3/8"
Gr. 5 bolts (2) flatwasher (1-1/2OD
x 3/16 thick) (3), and 3/8 locknuts
(4). Install four one inch spacers
(7) and two 1/4 inch spacer (8) on
each fork and wheel assembly (9).
Insert Wheel assembly Shaft (9)
into Axle Arm Weldment (1) and
retain with Snapper Pin (10).
NOTE:
See pages 3-8 & 3-9 for Axle Arm
locations.
1
1
10
10
8
7
8
7
5
6
7
4
3
2
6
5
6
7
9
2
3
3
4
4
3
9
FIGURE 8
NOTE bolt locations of stop.
72" RIGHT HAND CENTER48" CENTER 60" RIGHT HAND CENTER
R 12-13-95