Filter
Top Products
Assembly Section 3-4
ASSEMBLY
© 2004 Alamo Group Inc.
ASSEMBLY
Turf Flex 08/01
1
2
HYDRAULIC CYLINDER ATTACHMENT
Attach the Rear Hydraulic Cylinder to the Main Frame with Fittings pointing down. Retain with Pin and
Cotter Pin. Figure 5. Attach the Wing Hydraulic Cylinders to the the Main Frame and Toggel Links with Pins
provided. Figure 6.
WING MOWER ATTACHMENT
NOTE: The Wing Mowers are right and left mowers. On all Models there is not an inside Rear Caster Wheel, Instead
there is a Cutting Height Shaft support that rest on the Mainframe Flat Plate.
Position the Wing Mowers under the Wing Lift Arms and remove the Attachment Pin (1) from the Swivel. Attach
the Wing Mower to the Lift Arm and secure with 1/2" x 1-1/2" Bolt, (2) flatwasher, and locknut. Figure 7.
FIGURE 5 FIGURE 6
FIGURE 7
R 12-13-95