Filter
Top Products
7
locale where s uch r egulations exist, you
are legally responsible for m aintaining
the o perating condition of these parts.
Failuretodosoisaviolationofthelaw.
Refer to
CUSTOMER R ESPONSIBILITIES
TABLE
in the
MAINTE NAN CE
section.
STANDARDS: This saw is listed by
Underwriter’s Laboratories, Inc., in ac-
cordance with:
CSA Z 62.1--03 Chain Saws -- Occupa-
tional Health and Safety
CSA Z 62.3--96 Chain Saw Kickback
Occupational Health and Safety
ASSEMBLY
W ARNING:
Before using chain
saw, ensure all fasteners are secure.
CARTON CONTENTS
Check carton contents agai nst the fol-
lowing list.
Model C944.414460
S
Chain Saw (fully assembled)
S
Chain adjustment tool (bar tool)
S
2-cycle engine oil (bar oil not included)
S
Carrying case
Examine parts for damage. Do not use
damaged parts.
If you need assistance or find t hat part s
are m issing or damaged, c ontact your
Sears Ser vice Centre
NOTE: It is normal to hear the fuel filter
rattle in an empty fuel tank.
Your unit has been factory test ed and
the car buret or precisely adjusted. As a
result you m ay smell gasolin e or find a
drop of oil/fuel residue on the muff ler
when you unpack t he unit.
ASSEMBLY
Your saw is fully assembled; no
assembly is necessary.
OPERATION
KNOW YOUR SAW
READ THIS INSTRUCTIONMANUAL AND SAFETYRULES BEFORE OPERATING YOUR
CHAIN SAW.
Compare the illustrations with your unit to familiarize yourself with the
location of the various controls and adjustments. Save this manual for future ref-
erence.
Chain Adjustment Tool
(Bar Tool)
Front Handle
Front Hand Guard
Chain
Bar Oil
Fill Cap
Starter Rope
ON/ST OP
Switch
Starter Housing
Fuel Mix Fill Cap
Muffler
Bar Sprocket
Hole
Bumper
Spike
Direction
of Chain
T ravel
Guide Bar
Chain Brake Nuts
Chain Brake
Choke/Fast
Idle Lever
Throttle
Trigger
Rear
Handle
Cylinder Cover
Throttle
Lock--out
Adjusting
Screw