Sears 486.244412 Snow Blower User Manual


  Open as PDF
of 20
 
13
FIGURE 26
(Left Hand Side View)
STEP 12: (SEE FIGURE 26)
• Place the end of the blade pivot rod down through the
blade pivot shaft. Attach the other end of the blade
pivot rod to the lift handle tube. Secure both ends with
a hairpin cotter (O). The holes for the hairpin cotters
should be parallel to the ground.
• Use the two plastic ties to hold the cable securely
to the outside of the handle tube and away from the
tractortoavoiddirectheatfromthetractormufer.
• Squeeze the grip assembly to check blade pivot. To
adjust, see Service & Adjustments section on p. 16.
BLADE PIVOT
ROD
LIFT HANDLE
TUBE
BLADE
PIVOT SHAFT
HAIRPIN
COTTER (O)
HAIRPIN COTTER (O)
PLASTIC TIES
 previous next