Filter
Top Products
=
HARDWARE CONTENTS
Hardware shown full size
(4) Screws
(2) Lock
Washers
@
(2) Nuts
(2) Mounting
Screws
Parts bag contents not shown full size
Blade Nut/
Spark Rug
Wrench
r i¸ r..... i--r .
Locking Pin
i
Spark
Arrestor Screen
J Carburetor
Hex Key Screwdriver"
i 1
Parts packed separately in carton
3.2 oz. Oil
Shoulder Harness
Operator's Manual
Metal Blade Shield
Brush Tri-Blade
Handlebar
Shield Support
Plate
Sapling Saw Blade
i i I `•. ._• ii1.
Line Limiter
Plastic Line Xrimmer Shield
with Lthe Umiter Hardware
Dual Une "Cutting Head
O
Blade Transport/
Storage Cover
eeLS REQUIRED FOR ASSEMBLY
Torque Wrench-reference torque values are provided
throughoutthis manual for tightening hardware.
Phillips Screwdriver
8 mm Wrench
Provided with your Bmshwacker:
Hex Key
Blade Nut/Spark Plug Wrench
Locking Pin
TO REMOVE BRUSHWACKER FROM
CARTON
• Remove loose parts included with Brushwacker.
• Remove the loose plastic parts bag from the carton.
• Remove all packing material.
;, Check carton thoroughly for additional loose parts.
-5-
l