Sears 358.79828 Brush Cutter User Manual


 
: CONGRATULATIONS on your purchase of a Sears
Craftsmen Brushwacker. It has been designed,
engineered and manufactured to give you the best
possible dependability and performance.
Should you experience any problems you cannot easily
remedy, please contact your nearest Sears Service
CenterlDepartment. Sears has.competent, well trained
technicians and the proper tools to service or repair this
unit.
Please read and retainthis manual. The instructionswill
-- enable you to assemble and maintain your unit properly.
Always observe the "SAFETY RULES."
MODEL NUMBER: 358.798280
SERIAL NUMBER:
DATE OF PURCHASE:
THE MODEL AND SERIAL NUMBER WILL BE FOUND
ON A DECAL ATTACHED TO THE PRODUCT.
YOU SHOULD RECORD BOTH SERIAL NUMBER
AND DATE OF PURCHASE AND KEEP IN A SAFE
PLACE FOR FUTURE REFERENCE.
MAINTENANCE AGREEMENT
A Sears Maintenance Agreement is available on this
product. Contact your nearast Sears Storafor details
CUSTOMER =RESPONSIBILITIES
._:.Read and observethe safety rules..
Follow a regular schedule in maintaining, caring for,
and using your unit:
Follow the instructions under =Customer
Responsibilities" and
Operator's Manual.
=Storage" sections of this
PRODUCT SPECIFICATIONS
cUTrlNG PATH: .......... 16.5"(Dual Line Head,
ManualAdvance)
TRIMMER LINE ............ 095" Diameter Monofilament
SAPUNG BLADE ......... 8 3/4"(225mm), 20 tooth
.78"T'(20mm)Arbordiameter
BRUSHBLADE ........... 10"(255mm), 3tooth
.787"(20mm)Arbor diameter
ENGINE: ................. 36cc, 2-cycle Air Cooled
FUEUOILMIX RATIO:...........40:! (3.2oz_oilper gallon,gas)
IGNITION:................ SolidState
(Air gap.010"-.014")
IGNITIONTIMING: ........ Non-Adjustable, Fixed
SPARKPLUGTYPE: ...... ChampionCJ-TY
Autolite853
S_P_,RKPLUG GAP: ........ 020"
MUFFLER: ............... SparkArrestingScreen
(Requiresassembly)
ENGINERPM: ............ 11,000 RPM Maximum
BLADENUTTORQUE: .... 20-35 lb.-ft.
SHIELDSCREWS: ........ 70 lb.-in:Minimum
SPECIAL NOTICE
Forusers onU.S. ForestLandin the statesofCaiif0mia, Maine
Oregon, New Jersey, Idaho, Minnesota, and Washington. AI
U.S. Forest Landand the states ofCalifornia(PublicRseoulces
Codes 4442 and 4443), Oregon, and Washington require, by
law, that certain internal combustionengines operated on for-
est, brush, and/or grass-covered areas be equipped with a
sparkarrestor,maintainedineffectiveworkingorder,ortheen-
ginebeconstructed"equipped,and maintainedfor:thepreven-
tionoffire.Checkwithyourstate orIomdauthotitlesforreguis.-'i
ti0ns pertaining tothese requirements.. Failuretofollowthese
requirementsis a violationofthe law. The factory provided
spa_ arrest=orscreen is notasesmbledwiththisunit.
MANUFACTURED UNDER ONE OR MOR_ OF THE FOLLOWING pATENTS: 4,974,973;
5,105,'J'7_; D339,591; D333,954. OTHER U.S, AND FOREIGN PATENTS PEN DING.
r , rr
FULL TWO-YEAR WARRANTY ON
CRAFTSMAN GAS-POWERED BRUSHWACKER ® BLADED TRIMMER
Fortwo(2) years from the date of purchase, when this CraftsmanGas-Powered Brushwacker ismaintained, lubricated
and tuned-up accordingto the operating and maintenance instructionsin the owner's manua, Sears willrepair,free of
charge, any defect in matedals or workmanship.
This warranty excludes blade nylon line, spark plug,and air t_lter,which are expendable parts and become worn dudng
normal use.
If this Brushwacker is used for commercial purposes, this warrantyapplies for only 90 days from the date of purchase.
If this Brushwacker is used for rental purposes, this warranty applies for only 30 days frern the date of purchase. This
warranty applies only while this product is in use inthe United States.
WARRANTY SERVICE IS AVAILABLE BY RETURNING THE BRUSRWACKER TOTHE NEAREST SEARS SERV|CI
CENTER IN THE UNITED STATES.
This warranty gives you specific legal dghts, and you may also have other rights whichvary from state to state.
SEARS, ROEBUCK AND CO., D/817WA, HOFFMAN ESTATES, IL 60179
-4.