Filter
Top Products
tep Part to remove
Description
Remarks
Tool
2.
Control Box
(1) Take off the grommet from the rear
pannel of control box.
(See Fig. 10-4.)
(2) Disconnect the connector on the wiring
from the control box to the alternator.
(3) Remove the fuel strainer.
Remove the nut on top of the fuel
strainer located beside the control box.
(See Fig. 10-S.)
Fig. IO-4
(4) Take off the three bolts and remove the
control box from the frame.
(See Fig. 10-6.)
Fig. 10-5
10 mm spanner
Oi
box wrench
(5) Take off the bushing from the bottom of
Press the upper end of
the control box.
the bushing and pull
(See Fig. 10-7.)
out.
Fig. IO-6
Fig. 10-7