Filter
Top Products
15
4. Replace with a pre-wound spool, or re-
place line using a 25 feet (8 meters)
length of 0.080 inch (2 mm) diameter
Poulan P RO brand line.
WARNING: Ne ver use wire, rope,
string,etc.,whichcanbreakoffand bec omea
dangerous missile.
5. When inst alling new line on an existing
spool, hold the spool as shown.
6. Bend the line at the midpoint and insert
the bend into the slot in the center rim of
the spool. Ensure line s naps intoposition
in the slot.
Slot
7. With your finger between the lines, wrap
the lines evenly and firmly around the
spool in a clockwise direction.
8. Position the lines in the guide slots.
Guide slot
Guide slot
9. Place the spool in the cover as shown
below.
10. Insert the ends of the lines through exit
holes in the sides of the cover.
Line exit hole
Cover
11. Reinst all the spool and cover onto the
trimmerhead. Push untilco ver snap sinto
place.