Filter
Top Products
16
SERVICE AND ADJUSTMENTS
REPLACING THE LINE
1. Press the tabs on the side of thetr im me r
head and remove cover and spool.
Tab
Cover
Tab
Spool
2. Remove any rema ining line.
3. Clean dirt and debr is from all parts. Re-
place spool if it is worn or damaged.
4. Replace with a pre-w ound spool, or re-
place line using a 25 feet (8 meters)
length of 0.080 inch (2 mm) diameter
Poulan P RO brand line.
WARNING: Ne ver use wire, rope,
string,etc.,whichcanbreakoffand bec omea
dangerous missile.
5. When installing new line on an existing
spool, hold the spool as shown.
6. Bend the line at the midpoint and insert
the bend into the slot in t he center rim of
the spool. Ensure linesnaps intoposition
in the slot .
Slot
7. With your finger bet ween the lines, wrap
the lines evenly and firmly around the
spool in a clockwise direction.
8. Position the lines i n the guide slot s.
Guide slot
Guide slot
9. Place t he spool in the cover as shown
below.