Filter
Top Products
Adding Layers to a Graphic 78
Deko500 User’s Guide
SPECIFYING LAYER PROPERTIES
To specify properties of a layer:
1. Select the layer.
2. Do one of the following:
From the Layer menu, choose Properties
Open the Style window (F6) and choose Layer at the top of
the window.
3. Specify layer properties as desired.
LAYER PROPERTIES
Box
Defines the box surrounding the ellipse or rectangle. All values
refer to the original box, before any transformation — scaling,
rotation or skewing.
Left, Top
The left and top edges of the ellipse or rectangle, in screen
units.
Width, Height
The width and height of the ellipse or rectangle.
Aspect
The ratio of width to height.
Fixed aspect
Maintains the shape’s aspect ratio, whenever the width or the
height changes.
Transform
Defines how the box is transformed from its original position.
H Scale, V Scale
Horizontal and vertical scale factors.
Rotation
Rotation in degrees.
Skew
Skew amount.
H Origin, V Origin
The center of rotation.
Same priority as previous layer
Specifies that the current layer appears in the same plane as the
layer in front of it. In other words, Deko500 renders this layer as if
it were part of the layer in front of it.