Filter
Top Products
PAGE 30 — DCA-600SSV — OPERATION AND PARTS MANUAL — REV. #0 (07/13/09)
Maximum Amps
Table 8 shows the
maximum
amps the generator can pro-
vide. DO NOT exceed the maximum amps as listed.
Generator Output Voltages
A wide range of voltages are available to supply voltage for
many different applications. Voltages are selected by apply-
ing jumpers (6) to the
voltage change-over board
(Figure 15).
To obtain some of the voltages as listed in Table 7 (see
below) will require a fine adjustment using the
voltage regu-
lator
(VR)
control knob
located on the control panel.
Voltage Change-Over Board
The
voltage change-over board
(Figure 14) is located on
the control box, behind the generator control panel. This
board has been provided for ease of voltage selection.
Figure 14. Voltage Change-Over Board
240V Configuration
DCA-600SSV — GENERATOR OUTPUTS
segatloVelbaliavArotareneG.7elbaT
esahP-eerhT
V802V022V042V614V044V084
esahP-elgniS
V021V721V931V042V452V772
NEVER attempt to place jumper plates on the voltage
change-over board while the generator is in operation. There
exists the possibility of electrocution, electrical shock or
burn, which can cause severe bodily harm or even death!
DANGER - CHANGING JUMPER PLATES
spmAmumixaM.8elbaT
:ledoMVSS006ACD
detaR
egatloV
spmAmumixaM
021esahPelgniS
tloV
)eriw4(spma3.3331
042esahPelgniS
tloV
)eriw4(spma7.666
esahPeerhT
tloV042
spma4.3441
esahP
eerhT
tloV084
spma7.127