Filter
Top Products
53
Section 6: Specifications & Capacities
8/26/08
ZT60 & ZT72 Zero Turning Radius Mowers Riding Mowers Accu-Z
®
357-103M
Land Pride
Table of Contents
Starter 12-volt (.8 KW), solenoid shift positive engagement with Honda Engine
Electric starter w/Kawaski Engine
Ignition Electronic
Charging System 12-volt, 20 amp w/Honda Engine
12-volt, 13 amp w/Kawaski Engine
Governor Mechanical
Fuel Type Unleaded gasoline with octane rating of 87 or higher
Fuel Capacities 12 US GAL
Steering Type Twin lever steering provides independent control of each drive wheel.
Twin Lever Steering Controls Speed, forward, reverse, brake, and turns.
Steering Turning Radius True zero degree. Turns with counter-rotating independent drive wheels.
Brake Service Hydrostatic dynamic braking.
Parking Electrically released automotive style drum brakes.
Ground Speed Forward: 0-10 MPH
Reverse: 0-5 MPH
Mower Drive Single V-belt with electric clutch and spring tension idler pulley.
Safety Features Electric logic-control system governs blade engagement, forward & reverse motion,
engine starting & running, and parking brake functions.
Seat Deluxe cushion seat with arm rests.
Optional Suspension seat with arm rest.
Mainframe Construction Welded steel
Drive Motor Mount Fabricated from 1/4" steel plate.
Front Caster Wheels Free turning with greasable roller bearings.
Front Caster Forks 3/8” steel.
Deck Thickness 10 Gauge decks with reinforcements welded into spindle mount areas
Box-Section Reinforced Front Edge 3/16" thick x 4 1/2" x 2 1/2” Box
Deck Trim Edges Solid 1” x 3/8” steel bars for reinforced impact area
Deck Housing Depth 5 1/8” deep, (room for high-capacity mowing)
Deck Lift Foot-operated deck height adjustment with transport position.
Pin for setting height.
Hand Operated Controls Ignition switch, throttle lever, control levers, blade engagement switch,
choke knob and Fuel Tank Selector Valve.
Indicators Engine warning light and hour meter
Cup Holder Two cup holders molded into the left side fuel tank.
Accommodates nearly any cup size.
Cutting Heights Height adjustment in 1/4" increments from 1/2” to 4 1/2”
Mowing Blades Heavy-duty, heat-treated, high-lift steel blades
.25" x 2 1/2" x 20.9" .25 x 2 1/2” x 25”
Blade Tip Speed 18,700 FPM 18,500 FPM
Blade Drive V-belt drive to all three spindles. Spring tension idler pulleys.
Spindles Machined ductile iron housing, 1" diameter high carbon steel shafts
and greasable ball bearings.
Deck Suspension Free-floating deck using three blades with center blade to the front.
Four point chain suspension with counter balance springs.
Includes 4 anti-scalp wheels to improve flotation in rolling and uneven terrain.
ZT60 & ZT72 Accu-Z
®
(General Specifications)
Mower Model No ZT60 ZT72