Filter
Top Products
8
Introduction
PR1660, PR1672 & PR1690 Powered Rakes 314-216M
10/20/06
Land Pride
Table of Contents
Introduction
If customer service or repair parts are required contact a
Land Pride dealer. A dealer has trained personnel, repair
parts and equipment needed to service the Powered
Rake.
The parts on your Powered Rake have been specially
designed and should only bereplaced with genuine Land
Pride parts. Therefore, should your Powered Rake
require replacement parts go to your Land Pride Dealer.
Serial Number Plate
Refer to Figure 1
For prompt service always use the serial number and
model number when ordering parts from your Land Pride
dealer. Be sure toinclude your serial and model numbers
in correspondence also. The location of your serial
number plate is on the back side of the main frame close
to the gearbox. See arrow below.
Serial Number Plate Location
Figure 1
Further Assistance
Your dealer wants you to be satisfied with your new
Powered Rake. If for any reason you do not understand
any part of this manual or are not satisfied with the
service received, the following actions are suggested:
1. Discuss the matter with your dealership service
manager making sure he is aware of any problems
you may have and that he has had the opportunity to
assist you.
2. If you are still not satisfied, seek out the owner or
general manager of the dealership, explain the
problem and request assistance.
3. For further assistance write to:
Land Pride
Service Department
P.O. Box 5060
Salina, KS 67402-5060
E-mail address
lpservicedept@landpride.com
Land Pride welcomes you to the growing family of new
product owners. This Powered Rake has been designed
with care and built by skilled workers using quality
materials. Proper assembly, maintenance and safe
operating practices will help you get years of satisfactory
use from the machine.
Application
The PR16 Series Powered Rakes are designed and built
by Land Pride to be multi-functional seedbed and soil
surface preparation tools for landscapers and turf care
professionals. They are capable of grading, leveling,
shaping, cultivating, renovating, and pulverizing various
types of soil surfaces. They also are capable of raking
and windrowing soil, rocks and construction site debris.
The 60"and 72" working widths are compatible with
25-40 HP Cat. I 540rpm PTO tractors while the
90" working width is compatible with 540 rpm PTO Cat. I
and II tractors 35-75 HP. This means that Land Pride
customers can choose models for either smaller “space
restricted” landscaping and turf renovation jobs or all out
“wide-area” renovation.
See “Features and Benefits”, “Section 6" for additional
information.
Using This Manual
•
This Operator’s Manual is designed to help familiarize
you with safety, assembly, operation, adjustments,
troubleshooting and maintenance. Read this manual
and follow the recommendations to help ensure safe
and efficient operation.
• The information contained within this manual was
current at the time of printing. Some parts may change
slightly to assure you of the best performance.
• To order a new Operator’s or Parts Manual contact
your authorized dealer. Manuals can also be
downloaded, free-of-charge from our website at
www.landpride.com or printed from the Land Pride
Service & Support Center by your dealer.
Terminology
“Right” or “Left” as used in this manual is determined by
facing the direction the machine will operate while in use
unless otherwise stated.
Definitions
Owner Assistance
The Warranty Registration card should be filled out by
the dealer at the time of purchase. This information is
necessary to provide you with quality customer service.
NOTE: A special point of information that the
operator must be aware of before continuing.
IMPORTANT: A special point of information related
to its preceding topic. Land Pride’s intention is that
this information should be read and noted before
continuing.