Filter
Top Products
3
INVENTORY OF CONTENTS
1. WS-8010U—Giant Radio Controlled Weather Center.
2. TX4U—Remote Thermo-Hygro (temperature-humidity) includes: mounting
bracket/receptor, rain cover, and two mounting screws.
3. Instruction manual and warranty card.
ADDITIONAL EQUIPMENT (not included)
1. Three fresh 1.5V C batteries.
2. Two fresh 1.5V AA batteries.
3. Philips screwdriver.
4. Three mounting screws.
QUICK SET-UP
1. Insert two AA batteries into the Remote Thermo-Hygro.
2. Insert three C batteries into the Weather Center.
3. Wait 5 minutes for the Weather Center to receive remote signals from the
Remote Thermo-Hygro sensor.
4. Wait an additional 10 minutes for the WWVB signals to be received. If the
WWVB signal is not found in this time period, manually set the time (see
complete instructions) or wait until the Weather Center conducts its nightly
auto-search during the ideal reception time (12:00 am to 6:00 am).
5. Mount the units, ensuring that all units are sending and receiving signals.
DETAILED SET-UP GUIDE
I. BATTERY INSTALLATION
A. REMOTE THERMO-HYGRO SENSOR
1. Pull the cylindrical rain cover off the sensor.
2. Remove the battery cover (located on the backside of the sensor, above the
mounting post and bracket). Press the arrow and push in the direction of the
Battery
Cover
Mounting
Bracket/Receptor
Rain
Cover
Thermo-Hygro
Sensor