Filter
Top Products
14
4. Press key #3 while the MINIMUM outdoor temperature is still displayed.
“MAX” is now flashing to the right of where the forecast icon was, the
MAXIMUM outdoor temperature and humidity, the time and the date of
occurrence are all shown in the LCD.
5. Press key #3 to return to normal operating mode. (To exit the MINIMUM/
MAXIMUM mode, either press key #1 or key #2, or wait for the 20-second
automatic timeout).
Note:
The data displayed in the Outdoor MINIMUM/MAXIMUM fields are
dependent on which sensor has been selected (if there is more than one in
use). If a “boxed 1” is shown under the DATE DISPLAY then the
MINIMUM/MAXIMUM information will relate to the data received by
sensor #1. If a “boxed 2” is shown under the DATE DISPLAY then the
MINIMUM/MAXIMUM information will relate to the data received by
sensor #2. The same applies for a “boxed 3.” To view the
MINIMUM/MAXIMUM temperature and humidity from different sensors, it
is required to select a sensor before entering into the
MINIMUM/MAXIMUM mode. To select a different sensor press key #1, the
“boxed” number under the DATE DISPLAY will shift.
B. RESETTING THE MINIMUM & MAXIMUM TEMPERATURE &
HUMIDITY RECORDS
1. Press and hold key #3 for 3 seconds. This will effectively clear the
temperature and humidity for the indoor records, and all outdoor records for
all sensors. The Minimum and Maximum records will be reset to current
temperature and humidity readings.