Filter
Top Products
Model: WS-1517 www.lacrossetechnology.com/support 12
Temperature and Humidity Window
Indoor
and Outdoor Temperature can be displayed in either Fahrenheit (ºF) or Celsius (ºC).
Indoor and Outdoor Humidity (%RH) are displayed.
The weather station calculates indoor comfort level—Wet, Comfort or Dry.
Dew Point based on temperature & humidity readings.
Temperature alarms can be set on the weather station.
Thermo-hygro sensor remote battery status is monitored on the main weather station.
Channel Indicator
The weather station supports indoor temperature & humidity and up to five remote thermo-hygro sensors
(1 remote sensor is included).
There are no additional thermo-hygro sensors available for purchase.
La Crosse Technology
®
does not plan to carry add-on sensors.
The TS21 thermo-hygro sensor will not read to other channels.
The channel indicator will stay at CH 1.
The CHANNEL button has no function on this weather station.
Remote Sensor Status Icon
The wave icon above the channel 1 display shows the connection status of the remote
sensor.
When there is no signal, the remote sensor reading will show dashes.
Search for Remote Sensors
Hold the DOWN arrow button for 4–6 seconds to activate a search for all remote sensors.
Normally, the weather station will automatically find and display measurement results from the remote sensors.
Occasionally other radio transmission sources (TV, cordless or cell phones, etc.) can interrupt the sensor signal.
View Temperature and Dew Point
With temperature and humidity icon flashing, press the SET button to alternate between temperature and relative
humidity or dew point and relative humidity. The word DEW will appear between the outdoor and indoor temperature.
Dew Point Temperature is the saturation point of the air, or the temperature to which the air has to cool in order to create
condensation. The higher the dew points, the higher the moisture content of the air at a given temperature. Dew Point
temperature will be lower than current temperature.
Select Fahrenheit or Celsius
With temperature and humidity icon flashing, hold the SET button to alternate between temperature in Fahrenheit (ºF)
or Celsius (ºC).
Searching Strong No Signal