TP-6843 1/13 Section 3 VSC Controller Operation 37
3.15 Date and Time Menu
The date and time will typically be set at controller
powerup. To change the date, time, or time format
(12 hour or 24 hour), use the Date and Time menu.
See Figure 3-20.
3.16 Networking Information Menus
Use the networking menus to view and adjust
communication settings for systems with remote
RBUS devices such as a PIM, and for systems that
use the Kohler
®
OnCue
®
Generator Management
System.
RBUS is a proprietary RS-485 communications
protocol.
The Networking Information menu leads to submenus
for network and RBUS communication settings. See
Figure 3-21.
Figure 3-20
Figure 3-20 Date and Time Menu
Figure 3-21
Figure 3-21 Networking Information Menu
tp6804
Date:
02Dec2011
Time:
12:34pm
Time Format:
12hr
Date and
Time
To change the date and time, press the Select button
See Figure 3-7 for instructions.
<---- Return
tp6810
Networking---->
Information
Networking---->
Status
NS
RBUS ---->
Information
RB
<---- Return
Networking---->
Configuration
NC
See Figure 3-22.
See Figure 3-23.
See Figure 3-24.