Filter
Top Products
MAINTENANCE
OM 0369SB1148-A 30
L
UBRICATION
Use oil or a grease gun and lubricate as follows:
DESCRIPTION
INTERVAL LUBRICATION REQUIRED
8 hours
Grease each universal joint. Separate the sliding
parts and cover each one of them with grease
Driveline
16 hours Oil the connections
Chain
4 hours
and after each operation
Lubricate with chain lube
Drive Shaft 24 hours of operation Grease fitting on shear plate
Every month
Check oil level. If needed, add AGMA 5EP extreme
pressure oil, SAE 80W90 gear oil or equivalent.
Gearbox
Once a year Replace oil
Bearing 24 hours of operation Grease each auger bearing